Categories
Phoenix D385 Desiccant Dehumidifier
SKU 4026700
$4,199.99
Call for SPECIAL PRICING
Save this product for later
Phoenix D385 Desiccant Dehumidifier
Product Details
Brand: Phoenix
CALL FOR SHIPPING COST: (215) 592-0812
Xactimate Code: WTRDHMD
Phoenix D385 Desiccant Dehumidifier
The Phoenix D385 provides the perfect combination of features and performance the restoration industry has been craving in a desiccant dehumidifier. Ingeniously designed to operate vertically or horizontally, the Phoenix D385 provides the wide operating range and ultra-low grains of a desiccant with the water removal capacity of the largest LGRs in cabinet dimensions identical to our popular Phoenix 200 Max.
The Phoenix D385 is not like the “toy” portable desiccant dehumidifiers that lack real capacity. The D385 delivers 385 CFM of ultra-low grain process air. The true four hole configuration allows the Phoenix D385 to be located in the affected area with the 75 CFM re-activation air stream isolated from the drying chamber. Three hole design units inherently pull unaffected and/or outside air into the drying chamber. The D385’s four hole design allows the restoration contractor to set-up for effective positive, neutral or negative pressure operation.
The Phoenix D385 is easy to transport and set-up. The D385 will fit on your truck in the areas already designed for your LGRs and will move on to the jobsite with the same portability. All the power to the unit is provided by two 115 volts grounded power cords. Simply plug the cords into separate 15 amp circuits. Each cord draws only 11 amps to power the D385. The re-activation air stream is ducted through 6″ flex duct provided with the unit and stores conveniently in the top of the unit. The Phoenix D385 makes it possible for every restoration contractor to add the ultra-low grain performance of a desiccant with real water removal capacity to their equipment fleet.
The low price and high performance of the D385 make it possible to purchase three Phoenix desiccants with a higher combined capacity, for a smaller investment than a single 1000 CFM competitive desiccant.
[tab name="Features"]
- Operates vertically or horizontally
- Wide operating range
- Process airflow 385 CFM
- Reactivation airflow 75 CFM
- 116 pints water removal at AHAM
- Unlimited ducting possibilities
- Legendary stainless construction
[tab name="Specifications"]
| Industrial Use | Warehouse, Water Damage Restoration |
|---|---|
| Pint Capacity | 116 pints |
| Low Temperature Operation (41 degrees F and Under) | Yes |
| Desiccant | Yes |
| Internal Condensate Pump | No |
| Auto-Restart | Yes |
| Drain Hose Included | No |
| Humidistat | No |
| Automatic Defrost | Yes |
| Fan Operation | Runs Continuously |
| Number of Filters | 2 |
| Filter Type | MERV-11 and MERV-7 filters |
| Ductable | Yes |
| Lowest Operating Temperature | 10 degrees |
| Wi-Fi Capable | No |
| Energy Factor | 0 L/kWh |
| Bluetooth Capable | No |
| Continuous Drain Capable | No |
| Maximum Amperage | 22 Amps |
| Water Container | No |
| Controls | Manual |
| Weight | 105 lbs. |
| Height | 40 in. |
| Width | 24.25 in. |
| Voltage | 110-120 V |
| Number of Fan Speeds | 1 |
| Manufacturer-Suggested Room Size (sq. ft.) | 850 sq. ft. |
| Full Bucket Indicator/Auto Shutoff | No |
| Energy Star | No |
| Depth | 21.375 in. |
| Maximum Cubic Feet per Minute (CFM) | 385 CFM |
| Casters | Yes |
| Practical Room Size | 850 sq. ft. |
Display prices in:USD
